1. Acrylic mirror cannot be stored together with organic substances

Acrylic lens is a kind of organic glass lens and an organic substance. Organic substances and organic substances stored together will have similar and compatible principles. Therefore, acrylic mirror cannot be stored together with other organic solvents and cannot contact organic solvents. Acrylic mirror are prohibited to be stored together with organic solutions.

亚克力镜片不能与有机物质一起存放亚克力透镜是一种有机玻璃透镜和有机物质。有机物质和储存在一起的有机物质将具有相似和兼容的原理。因此，亚克力镜片不能与其他有机溶剂一起存放，也不能与有机溶剂接触。亚克力镜片禁止与有机溶液一起存放。

2. When storing acrylic mirror, pay attention to keeping some gaps

This is also due to the characteristics of acrylic mirror. Acrylic mirror or acrylic plates will expand and contract when heated or cooled, which is related to the characteristics of their organic substances. According to the climate change, the acrylic mirror will change slightly. At this time, it is necessary to leave a gap in the acrylic mirror when they are stored, Clearance shall be kept between acrylic mirror.

存放亚克力镜片时，注意保持一些间隙这也是由于亚克力透镜的特性。亚克力镜片或亚克力板在加热或冷却时会膨胀和收缩，这与它们的有机物质的特性有关。根据气候变化，亚克力镜片将略有变化。此时，在存放亚克力镜片时，有必要在亚克力镜片中留出间隙，亚克力镜片之间应保持间隙。

3. Pay attention to prevent damage when cleaning acrylic mirror

Acrylic mirror usually have a part of ash layer on the surface as the number of uses increases. Some people directly use dry paper towels to directly wipe, and some people directly use hard towels to directly wipe when they go to the bathroom. In fact, it is easy to scratch the electroplating layer of acrylic mirror in this way. We usually recommend that our customers use soapy water when explaining to their customers, and 1% soapy water if possible, Then use a soft towel dipped in soapy water to wipe, so that it can be wiped clean, and it is not easy to scratch the lens. Take two out of one. It is prohibited to use a hard paper towel to wipe acrylic mirror.

清洁亚克力镜片时注意防止损坏随着使用次数的增加，亚克力镜片表面通常会有一部分灰烬层。有些人直接用干纸巾直接擦拭，有些人在上厕所时直接用硬毛巾直接擦拭。事实上，用这种方法很容易划伤亚克力镜片的电镀层。我们通常建议我们的客户在向客户解释时使用肥皂水，如果可能的话，使用1%的肥皂水，然后用蘸有肥皂水的软毛巾擦拭，这样就可以擦拭干净，而且不容易划伤镜头。一取二。禁止使用硬纸巾擦拭亚克力镜片。

4. Do not use acrylic mirror at high temperatures

It was also mentioned in the second point just now that acrylic mirror are plastic compounded of organic compounds. Plastics are afraid of high temperatures. Many plastics can be injected at high temperatures, so acrylic mirror are natural enemies at high temperatures. There is a limit in the use process. We require acrylic mirror not to be used at high temperatures. If the temperature exceeds 85 degrees Celsius, acrylic mirror will be partially damaged, It is prohibited to bring the acrylic lens into the high temperature place.

不要在高温下使用亚克力镜片刚才第二点也提到了亚克力透镜是有机化合物的塑料复合物。塑料怕高温。许多塑料可以在高温下注射，因此亚克力镜片在高温下是天敌。使用过程中存在限制。我们要求亚克力镜片不能在高温下使用。如果温度超过85摄氏度，亚克力镜片将部分损坏，禁止将亚克力镜头带入高温场所。

5. Friction free acrylic lens surface during delivery

In many cases, when we deliver acrylic mirror to customers, there is a problem that the surface of acrylic mirror cannot have fingerprints. This is when they are assembled here. When they are handed over to the end user, the surface of acrylic mirror must not have any fingerprints. In this way, the end user will feel that this product has not been used, and that they are not second-hand. Another point is, If there is finger print on the acrylic lens. When checking whether the acrylic lens is scratched, there is an additional process, which increases the processing cost.

交付过程中无摩擦亚克力镜片表面在许多情况下，当我们向客户交付亚克力镜片时，存在一个问题，即亚克力透镜的表面不能有指纹。这是他们在这里组装的时候。当它们交给最终用户时，亚克力镜片的表面不得有任何指纹。这样，最终用户会觉得该产品没有被使用过，而且不是二手产品。另一点是，如果亚克力镜片上有指纹。检查亚克力镜片是否划伤时，需要额外的工序，这会增加加工成本。