Acrylic mirror panels are widely used in light boxes, signboards, signs, display racks, etc. Good light transmittance, one of acrylic (PMMA organic glass. The required light intensity is small, saving electric energy; the impact resistance, seventeen times of ordinary glass; convenient maintenance, also recycling again. Acrylic as a kind Chemical organics, to ensure that their final use has achieved the best state, you must pay attention to your daily storage!
I. Storage Precautions for Acrylic Mirror Plate All acrylic mirror panels have a protective film. Keep the acrylic board when transported. Do not tear the protective film during storage and processing to prevent damage. Keep away from the heat source, wet environment. The material should be stored in a place where clean, dry, ventilated, and temperatures, and the original packaging is intact. Customer use should follow the following guidelines:
1 must keep the original packaging intact, do not tear open the protective film before use, because dust in the air is attached to the surface of the sheet due to static electricity, while the protective film can also protect the acrylic mirror plate No wear and scratch during the movement.
2 Store on the air in a ventilated environment, do not put the acrylic mirror plates in high temperatures, moist and sunlight to the place.
3 Vertical Storage: If you store the board, you must be cautious to prevent the waves. When the sheet is placed vertically, the angle inclination cannot exceed 10 degrees. A frame made of a plywood acts as a bracket.
4 horizontal storage: flat acrylic mirror, must pay attention to avoid warpage, slipping and scratching of plates. If you want to store different sizes of sheets, place the largest sheet on the bottom and place it at the top. This avoids sliding during the shipping process, and when the packaging is damaged, debris or soil is deposited between the sheet, reducing the risk of scratches. The wrapping film in the tray package protects the sheet from dust and moisture, and the storage period is intact. Second, the use of acrylic mirrors Precautions
1 The thermal deformation temperature of the ordinary acrylic plate is about 100 ° C, and the temperature is continuously used should not be higher than 85 ° C.
2 Acrylic plates are prone to static electricity, adsorb dust. When cleaning, use a soft cotton cloth to 1% soap water.
3 Acrylic plate surface hardness corresponds to aluminum, should be carefully avoided when using or processed. If it is scratched, the original gloss surface can be restored by polishing.
